Analytical Devices: Viscocity Standards

Product Range :

CAP Oil Fluids

General Purpose Oil

General Purpose Silicone

High Temperature Silicone Fluids

Krebs Viscometer Oil Fluids

RST Oil Fluids

VisCal Kit

Summary :

CAP OIL FLUIDS

General purpose oil fluids are best suited for those instruments using Cone/Plate Viscometers/Rheometers.

Features & Benefits

• Accuracy: +/-1% of viscosity value

• Appropriate for use at shear rates greater than 500 sec-1

• Recommended for use with cone/plate Viscometers at viscosities above 5,000 cP

• Brookfield oil viscosity standards are hydrocarbon based, either mineral oil or polybutenes.

• Brookfield Viscosity Standards are accurate to ±1% of the stated viscosity and are certified by methods traceable to the United States National Institute of Standards and Technology (NIST). The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument. All fluids are supplied in 1/2 litre (1 pint) containers complete with a certificate of calibration. CAP Oil Fluids are supplied in 150 mL (4 oz.) containers

GENERAL PURPOSE OIL

Oil Viscosity Standards are used during calibration checks of specific instruments such as cone/plate viscometers or rheometers as well as Krebs spindle geometry instruments. General Purpose Oil Fluids are best suited for those instruments using Cone/Plate Viscometers/Rheometers.

Features & Benefits

• Accuracy: +/-1% of viscosity value

• Appropriate for use at shear rates greater than 500 sec-1

• Recommended for use with cone/plate Viscometers at viscosities above 5,000 cP

• Brookfield oil viscosity standards are hydrocarbon based, either mineral oil or polybutenes

• Brookfield Viscosity Standards are accurate to ±1% of the stated viscosity and are certified by methods traceable to the United States National Institute of Standards and Technology (NIST). The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument. All fluids are supplied in 1/2 litre (1 pint) containers complete with a certificate of calibration. CAP Oil Fluids are supplied in 150 mL (4 oz.) containers

GENERAL PURPOSE SILICONE

Silicone viscosity standard fluids are most commonly used to verify calibration of Brookfield lab viscometers/ rheometers and are less temperature sensitive than mineral oils.

General purpose silicone fluids are the most commonly used standard for verifying calibration of your Brookfield Viscometer/Rheometer. Silicone Standards Are Newtonian fluids which are accurate to ±1% of viscosity value. Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards. Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST). The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument. All fluids are supplied in ½ litre (1 pint) containers complete with a certificate of calibration.

Features & Benefits

• Accuracy: ±1% of viscosity value

• Excellent temperature stability

• Recommended for use with Brookfield and most other rotational viscometers

• Most economical

• Special viscosity values and temperature calibrations available upon request

HIGH TEMPERATURE SILICONE FLUIDS

High Temperature Silicone Fluids Are Newtonian fluids calibrated at 25°C, 93.3°C and 149°C. These fluids are accurate to ±1% of viscosity value and are recommended for use with the Brookfield Thermosel accessory.

Features & Benefits

• Accuracy: ±1% of viscosity value

• Excellent temperature stability

• Recommended for use with Brookfield and most other rotational viscometers

• Most economical

• Special viscosity values and temperature calibrations available upon request

KREBS VISCOMETER OIL FLUIDS

Krebs Oil Fluids are for use with the KU series Viscometers. Like all Brookfield Viscosity Standards, the Krebs Oil Fluids are accurate to ±1% of stated viscosity values. Krebs Oil Fluids are supplied in 1/2 litre (1 pint) containers complete with certificate of calibration.

Features & Benefits

• Accuracy: ±1% of viscosity value

• Appropriate for use at shear rates greater than 500 sec-1

• Recommended for Brookfield KU series Viscometers

• Brookfield oil viscosity standards are hydrocarbon based, either mineral oil or polybutenes.

• Brookfield Viscosity Standards are accurate to ±1% of the stated viscosity and are certified by methods traceable to the United States National Institute of Standards and Technology (NIST). The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument. All fluids are supplied in 1/2 litre (1 pint) containers complete with a certificate of calibration.

RST OIL FLUIDS

Silicone viscosity standards are commonly used to verify calibration of Brookfield Viscometers and Rheometers.

These Oil Fluids are for use with the RST series Rheometers. Like all Brookfield Viscosity Standards, the RST Oil Fluids are accurate to ±1% of stated viscosity values. RST Oil Fluids are supplied in 1/2 litre (1 pint) containers complete with certificate of calibration.

Features & Benefits

• Accuracy: ±1% of viscosity value

• Appropriate for use at shear rates greater than 500 sec-1

• Recommended for Brookfield RST series Rheometers

• Brookfield oil viscosity standards are hydrocarbon based, either mineral oil or polybutenes

• The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument. All fluids are supplied in 1/2 litre (1 pint) containers complete with a certificate of calibration.

SPECIAL ORDER SILICONE FLUIDS

Custom non-standard viscosity or temperature range silicone fluids. Special Order Silicone Fluids are for you if you need a nonstandard viscosity or temperature range. We can modify our silicone fluids to meet most requirements.

Features & Benefits

• Accuracy: ±1% of viscosity value

• Excellent temperature stability

• Recommended for use with Brookfield and most other rotational viscometers

• Most economical

• Special viscosity values and temperature calibrations available upon request

VISCAL KIT

Conveniently test the calibration of your viscometer or rheometer with this all-in-one viscosity calibration kit. An affordable "must have" for all Brookfield Viscometer/Rheometer owners with everything you need in order to verify the calibration of your instrument!

Features & Benefits

• Perfect for the "first time" viscometer/rheometer buyer

• Everything needed to verify calibration is in one conveniently packaged kit